Description
- Description
- Product Files
- Techlight Terms
Techlight CSL LED Canopy / Soffit Light
Application
The high performance luminaire is designed for canopy/soffit applications where long life, low maintenance, and consistent color rendering is required. Areas with limited accessibility due to fixture location or where heavy traffic makes maintenance difficult are ideal applications such as retail canopies or parking garages.
Construction
The heavy duty housing is constructed of cast aluminum with heat dissipating fins. The optical assemblies are sealed in place using a silicone gasket for weather tight protection. Fully sealed optical compartment isolates LED PCB from driver compartment. Anti-siphon power leads prevent water entry thru conductors. Wireway is epoxy potted to seal driver compartment. Modular LED system for ease of maintenance. ETL listed for wet locations (IP65). Additional IP66 rating available upon request. Each fixture comes standard with preps to accomodate advanced wireless control, management and reporting systems for outdoor lighting.
Finish
A super durable powder coat finish. Standard colors available: Black, Bronze, Silver, White. Custom colors available upon request.
Optical System
The fixture is available with either a clear patterned, flat tempered glass lens providing a uniform and symmetrical light pattern or a molded borosilicate glass drop lens to provide a softer, wider light pattern.
Electrical System
Available in 4000K-80 CRI Neutral White, 4000K-90CRI Neutral White or 5000K-80 CRI Cool White color temperatures. Available with 100-300V 50/60 Hz IP67 power supply. LEDs rated for over 50,000 hours at 25°C ambient temperature. 347V~480V input option available. 0-10V dimming. Built-in surge protection up to 10 kV. Built-in Active PFC Function >95%/Full load. LED Power Supply conforms to UL8750 standards and is IP67 rated.
Mounting
The fixture can be thru hole flush surface mounted (2-1/4" diameter deck penetration required) using the pre-set mounting holes and hardware provided with each fixture or it may be mounted via pendant. Surface Mount is suitable for use on single or dual skin canopies with minimum 22ga, 0.030" thickness. Surface mount fixture provided with gasket rear mounting surfaces and stainless steel hardware for attachment to canopy. Self-sealing screws are provided but RTV application on top canopy deck is recommended. Side conduit entry (SCE10) option is provided with a 3/4"-14 NPS threaded entry and 10 of 16/3 600V STW power cord (3/4" conduit or Seal-Tite fitting provided by others). Side conduit entry is not for through-wiring. Consult factory for 5-wire power cord if 0-10V dimming is being utilized. Pendant Mount provided with factory installed bracket and hanger type J-Box and Hub for 3/4" pipe stems. Safety chain kit available. Pendant Mount configuration is provided with box plate and hub (Pendants sold separately).
Listings
ETL listed for wet locations. Meets US and Canadian safety standards. -40°C to 50°C ambient operation. RoHS Compliant. Certified compliant with NSF2 standard for non-splash zone areas. IP66 certified by ETL Intertek Testing.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
