Description
- Description
- Product Files
- Techlight Terms
Techlight RCLS Recessed Square HID Canopy
Application
The RCLS Recessed Canopy light was designed for low to mid-level lighting under storefront awnings, indoor retail applications, or any recessed mount lighting application. The finished product is an unobtrusive light fixture where you see the results, and not the fixture itself.
Construction
The fixture is constructed of heavy galvanized steel. A clear prismatic glass lens is gasketed in place to make the fixture weather resistant.
Finish
A Super Durable Polyester powder coat finish is electrostatically applied in our state of the art paint facility. Standard colors available: Black, Bronze, US Green, White. Custom colors available upon request.
Optical System
High reflectance white paint directs the light down through a clear prismatic tempered glass lens for a uniform light pattern.
Electrical System
Provided with a 4KV pulse rated socket or GX24q socket assembly. Fixtures are available with a 32W CFL, 50W-250W Metal Halide, and 50W-250W HPS lamp and ballast system. Each 60HZ CWA multi-tap1, 480V, or Fluorescent ballast is pre-wired and installed for convenience.
Mounting
A mounting collar is provided for rough-in installation. It comes with two mounting brackets that are slotted for adjustability. The housing slips into the frame and is held by four spring loaded tabs for secure installation.
TECHLIGHT USA RETURNED GOOD POLICY
There is a restocking charge on any item returned for credit or exchange. A restocking charge will be made on returned merchandise which does not have a confirmed RGA authorization number. All approved returns will be subject to a handling charge, freight, and cost of reconditioning and repacking if it is deemed necessary to restore the goods to realable form. Techlight reserves the right to adjust the restocking charge or refuse return authorization on the following exclusions. (1) If the product requires repackaging. (2) If the product is damaged. (3) Unsalable without excessive repair. (4) If the product is a custom color. (5) If the product is a custom order. (6) Damage to poles: all poles are shipped in a standard non-soluble, water resistant packing material, or may be completely packaged in cardboard and marked with warning notice for removal. Failure to remove the packaging upon arrival may result in damage to the pole finish, thus disallowing returns and voiding the warranty. It is the responsibility of the customer to inspect poles for freight damage upon deliver. Any claim for damages in transit must be made by the purchaser to the delivering carrier. Techlight will accept no responsibility for the failure to do so.
